LOW COST AND QUIET PORTABLE SIEVE SHAKER FOR GENERAL PURPOSE LABORATORY
PROGRAMMABLE MOTION WITH DIGITAL CONTROLLER
ELECTROMAGNETIC VIBRATORY SIEVE SHAKERS
Built for heavy duty applications
Low Noise Levels
EXCELLENT FOR AGGREGATE FINES TO 3/4"
Used by DOT's in several states
18" Sieve Capability
Results comparable to electro-formed sieving
DRY SEPARATIONS TO 3 MICRONS
FREE FLOWING POWDERS
SONIC AIR COLUMN
NO PARTICLE ATTRITION
NO SCREEN WEAR
TOLERANCES OF +/- 2 MICRONS
WITH ELECTRO-FORMED SIEVES
FLUIDIZATION BY ROTATING AIR JET AND VACUUM
RECOMMENDED FOR SEPARATIONS OF FINE POWDERS (> 25 mic), INCLUDING ELECTROSTATIC, AND COHESIVE PARTICLES
Seving Endpoint Determination
After one minute of continuous sieving,
if the amount retained on any one sieve
changes by less than 1%.
PARTICLE SEPARATION SYSTEMS
TEL (804) 318-3686 FAX (703) 991-7133
Copyright 2012: QAQC Lab | Particle Measurement System | All rights reserved.
EQUIPMENT FOR QUALITY CONTROL AND R&D
Telephone (804) 318-3686
Toll Free US (866) 244 1578
Fax (703) 991-7133
Hours 8 AM - 6 PM EST
INTERNATIONAL & DOMESTIC SALES
CUSTOMER SERVICE * SALES * TECHNICAL SUPPORT
REPLACING SIEVE ANALYSIS
analyzer, correlates to sieve analysis, or other particle sizing methods.
RESULTS IN SECONDS
TECHNICAL SERVICES FOR
TELEPHONE (804) 318-3686
TOLL FREE (866) 244-1578
COMPLETE INTERACTIVE SAMPLER CATALOGUE
Great for quick, on site analysis
Durable, portable, and affordable.
No more guess work
Can be used in a retail setting
Easy to use
• Range: 20 µm to 125 mm
• Drive / sieving motion: electromagnetic 3D
• Amplitude: 0 - 3 mm,
digital setting in 0.1 mm steps,
“Closed Loop” amplitude control
Digital Air Jet sieve shaker
for dry granulometric testing of particles from 5 μm to 4 mm.
Digital electromatic sieve shaker for sieves from Ø 60 a 203 mm. Its
three-dimensional movement throughout the sieve column makes it very effective when carrying out granulometric tests.
It includes digital power, timing and intermittence controls for sieving.
ENDECOTTS VIBRATORY SIEVE SHAKERS
IRIS 3D MOTION SIEVE SHAKERS
Small, compact and light, it is the economic option from the IRIS range of electromagnetic sieve shakers.
Allows sieves from Ø 60 to 203 mm Up to 7 sieves of 50 mm in height, or 14 sieves of 25 mm in height.
It includes digital power, timing and intermittence controls for sieving. It is supplied with
the standard fixation system.
Designed for high sample volumes, it can admit 5 sieves of 80 mm in height, or 8 sieves of 50 mm in height.
The diameters range from 250 to 305 mm. The power, time of sieving and intermittence are all digitally adjusted.
It can be supplied with the standard fixation system or with the “Easy- Press” rapid system, according to your choice.
It allows a large load capacity.
It is designed for sieves from Ø
400 mm, although it can also
allow smaller diameters. With
the highly effective 3D motion,
sieving times are short; even with
large product samples. Like the
other models, it includes digital
power, timing and intermittence
controls for sieving.
It is possible to choose between the standard anchoring system and the “Easy-Press” rapid system.